Thank you for your visit
This machine was recently sold. Take a look at similar options or get in touch with us directly.
Battenfeld - Microsystem MM 50/50DE-INJ-BAT-2007-00001
Do you have further questions? Contact us.
Borja Garcia
+34 679 019 350
b.garcia@gindumac.com
- GINDUMAC
- Products
- Plastics Processing Machinery
- BATTENFELD Microsystem MM 50/50 Injection Moulding System
This BATTENFELD Microsystem MM 50/50 Injection Moulding System consists of two injection moulding machines with 50kN clamping force connected by a turntable incl. light barriers for inserts (2K). Both machines were build in the year 2007 and 2006 in Austria. The plate dimensions are 364 x 196 mm, the min./max. mold height 100 - 300 mm and the maximum opening width 300 mm. Both machines are equipped with a MOTAN micro conveyor system and overpressure blower. Machine #1 features a drying SHERLOCK camera system and ionization. Both machines are operated by BATTENFELD UNILOG B4 control units.
Overview
- brand: Battenfeld
- year: 2007
- MODEL: Microsystem MM 50/50
- application type: Injection Moulding
- Location: Germany
- machine type: Electrical Injection Moulding Machine
- control unit brand: BATTENFELD
Technical Information - Battenfeld Microsystem MM 50/50
Control Unit
- Control Brand: BATTENFELD
- Control Model: UNILOG B4
Technical Specification
- Clamping Force: 50 kN
Additional Information
Additional equipment
- Both machines with Motan Micro conveyor system
- Drying Sherlock camera system in machine #1
- Ionization in machine #1
- Overpressure blower on both machines
- Turntable incl. light barriers for depositing parts (2K)
Machine Benefits
Qualitative Machine Benefits
- 2x battenfeld microsystem mm 50/50 (2007 & 2006) connected with rotary table as one complete injection moulding system
- The machines can also be operated individually, as stand-alone injection molding systems
- Either machine can run as a normal microsystem 50 if the integration between the two machines is removed
- The turntable in the middle can be switched off & both machines can produce separately from each other in this setup
- The turntable could also be removed completely & both machines would produce independently and function as "normal" stand-alone machines
- The machines had normal wear parts repaired & maintenance carried out over the years
Extra Information
Machines are sold as there is not project for them anymore
*There may be differences between the data shown and the actual values, this should be confirmed by the sales representative.
Borja Garcia
Payment Terms
Payment in advance
Asset Financing